Tell us the part
Geometry, material, what is on it, how many an hour and where the machine will stand.

Krumm Tec Cleaning Technologie L.L.C. · Abu Dhabi
Cleaning, air filtration and mold testing systems engineered to order for critical and complex processes. Built in Germany since 1958: 76 systems across 8 families, specified, commissioned and serviced in the Emirates.
What we build
Cleaning, filtration and mold testing are specified together, by the people who build the machines. That is what makes a solution engineered to a critical or complex system possible in the first place.

Aqueous and solvent, ultrasonic, high and low pressure, blasting and dedusting. Bench cabins through to fully automated multi-bath plants, built around the part rather than a catalogue number.
See the systems 7 systems
LRF extraction and filter units that take dust, oil mist and vapour out of the working area, standing alone or integrated into the cleaning system they serve.
See the systems 5 systems
FPG units that clean cooling channels and check flow rate and tightness before a mold reaches production, so a fault is found off the line rather than on it.
See the systemsEngineered to order
A standard machine fits a standard part. When the process is too special, when the system has to go into a line that already runs, or when the part is simply the wrong shape for a catalogue chamber, Krumm Tec engineers the chamber around the part instead.
Cleaning methods
Start from what is on the part, not from a catalogue number. The method decides the machine: 11 of them, 6 shown here.

Coolant, swarf, release agent and burnt-on residue removed by pressure and flow, with heated media and programme control.
Open method 19 systems
Cavitation reaches blind holes, threads and fine geometry that no jet can address, in aqueous or solvent baths.
Open method 46 systems
Immersion baths with solvents, with or without ultrasound, for oils, waxes, polishing paste and machining residue.
Open method 28 systems
Dry ice and granulates for smooth and sensitive surfaces, contained in a cabin with extraction and media recovery.
Open method 24 systems
Solid particulate, dry dust, vapour and gas taken out of the working air by the LRF range, at source.
Open method 5 systems
UV and LED curing of light-sensitive resins, for SLA, PolyJet and other additively manufactured parts.
Open methodWhy Krumm Tec
Krumm Tec engineers cleaning, air filtration and mold testing systems to order, for critical and complex processes where a standard machine does not fit: cabins for smaller applications through to fully automated plants.
Powder-coated steel or high-grade stainless. Simple, safe operation kept in the foreground, so the machine survives a shift pattern rather than a demonstration.

Standard machines are the baseline. The strength is in systems configured to a customer’s part: geometry, contamination, cycle time, operating environment.
Construction driven by functionality and by the integration of every process step into one enclosure: wash, rinse, dry, extract, filter.
Regular service is what keeps equipment reliable and safe: and in the Emirates that is handled in-country, by resident technicians with spare parts to hand.
Engineering sequence
Four steps, the same on a single bench cabin and on a fully automated multi-bath plant.
Geometry, material, what is on it, how many an hour and where the machine will stand.
We come back with a method and a machine: and, where it matters, a cleaning trial on your own sample.
Manufactured in Endingen, configured with the options the part needs, run and witnessed before it ships.
Installed, commissioned and operator-trained in the Emirates, then inspected and serviced from Abu Dhabi.
The range
Pick a family, or let the product finder narrow all 76 systems by method, material and part size.

Immersion cleaning and flushing
Open family
Modular cleaning lines
Open family
RK, RKH and RKK cabins
Open family
Marlon and large-component plants
Open family
Extraction, dust and vapour
Open family
UV and LED post-exposure
Open family
Cooling-channel test and cleaning
Open family
Cleaning tables with shelving
Open familyInside the machines
Not renders. These are the tanks, transducers, controls and doors that go into the systems above.









Krumm Tec Shield™
A defined scope for programmes that cannot send a component out of the country: in-country cleaning capability, resident technicians and a documented process that survives an audit.
Industries
Every sector page lists the parts, the methods and what changes in the Emirates.
Production, service and maintenance of weapon systems.
Open the sector
Turbines, hydraulics, board equipment and interior fittings.
Open the sector
Engine components, sheet metal, plastic parts, prototypes.
Open the sector
Electrical assemblies, HVAC, shafts and chassis components.
Open the sector
Devices, dental technology, process tooling, laboratory equipment.
Open the sector
Cooling channels, hot runners, flow and leak testing.
Open the sector
Dust and deposits, battery components, ATEX solvent work.
Open the sector
Moulds, dies, cutting tools and fixtures.
Open the sector
Cases, bracelets, dials, hands and clasps.
Open the sector
PolyJet, FDM, SLA, SLS and metal post-processing.
Open the sector
Selected customers & ecosystem
Selected companies and partners across the industries we serve.
01Defense & security
02Aerospace & aviation
03Rail & mobility
04Energy & industrial operations
05Automotive & advanced manufacturing
06Electrical & electronics
07Medical, chemical & pharmaceutical
08Precision, jewelry & watchmaking
Selected logos illustrate customer references, project relationships or industry experience. No endorsement or current contractual relationship is implied.
Where we operate
The Abu Dhabi entity exists so that a German machine can be specified, commissioned, serviced and kept compliant without the part, or the engineer, leaving the country.

About the company
Krumm e.K. has manufactured in Endingen am Kaiserstuhl since 1958. The UAE entity carries that engineering into the Emirates, with specification, commissioning, inspection and spare parts held in-country.
Got questions?
The things buyers ask before an enquiry turns into a specification.
That is the normal case. The standard machines are a baseline; tanks, baskets, nozzles, handling, filtration and control are configured around the part. The options and extras page shows what changes and why.
It follows from the contamination and the geometry, not from the machine. Pressure and flow for coolant and swarf; cavitation for blind holes and fine geometry; solvent immersion for oils and waxes; dry ice or granulate where the surface must not be wetted. The product finder filters all 76 systems by method.
Yes. A significant part of the range is built in EX variants for flammable solvents and dust atmospheres. The safety and ATEX page sets out how the engineering differs.
That is the reason the Abu Dhabi entity exists. Inspection, repair, spare parts and operator training are handled in-country; scope and response times are agreed per customer rather than published as a blanket SLA.
Where the result is in question, a cleaning trial on your own sample is the sensible next step after the process concept. Send the part details through the contact form and we will tell you whether a trial is warranted.
Krumm Tec Shield™ is the defined scope for exactly that: in-country cleaning capability, resident technicians and a documented, repeatable process that survives an audit.
Contact us
Tell us what you are cleaning, what is on it and where the machine will stand. We come back with a process concept.