
Cleaning methods
11 ways to take it off
The method decides the machine. Start from what is on the part: oil, swarf, release agent, resin, dust, biological load, and the system follows.
The methods
Pick the process, not the product
Each method links to the systems that carry it, counted live from the catalogue.

High-pressure cleaning
Efficient cleaning, suitable for fast manual processes.
Open method 19 systems
Ultrasonic cleaning
Cavitation reaches what a jet cannot: blind holes, threads, fine geometry.
Open method 46 systems
Degreasing, derusting, passivation
Grease and oil removed in immersion baths with solvents, also combined with ultrasound.
Open method 13 systems
Rinsing, oscillation & immersion
Movement through the bath, not pressure at the surface.
Open method 8 systems
Low-pressure cleaning with solvent
Gentle surface cleaning at low pressure, with explosion protection.
Open method 28 systems
Blasting: dry ice & granulates
Powerful, environmentally friendly cleaning for sensitive components and smooth surfaces.
Open method 9 systems
Blasting of acids & toxic substances
Safe cleaning when working with hazardous substances.
Open method 4 systems
Dust removal & dust separation
Airflow to blow away dust and particles for efficient cleaning.
Open method 24 systems
Extraction & filtration
Extraction and filtration of gases and particles for a safe working environment.
Open method 13 systems
Disinfect & sterilise
Uniform disinfection and extraction of contaminated air for germ-free surfaces.
Open method 5 systems
Post-exposure of plastics
UV and LED curing for light-hardening plastics and resins.
Open methodEngineering solutions for operational readiness
Which method fits your part?
Send us a sample. Krumm Tec runs a cleaning test and reports the method, the media and the cycle that worked.
