A modular CBRN mission system designed around the operational requirement rather than around a vehicle: configured by threat scenario, response doctrine and operating environment.
Concept under developmentModularVehicle independent
The concept
Modular by architecture. Independent by design.
Shield™ applies the same engineering logic Krumm Tec uses for industrial cleaning to a defence and emergency-response requirement: define the contamination and the operational reality first, then build the system that answers it.
Because the mission modules are independent of the base vehicle, the configuration can follow the doctrine rather than the fleet. Integration onto a suitable platform is subject to payload and interface requirements.
Design principles
Modular architecture: configured to threat scenario, response doctrine and operating environment
Vehicle independent: integration on suitable platforms, subject to payload and interface requirements
UAE localization: designed for phased engineering, integration, service and manufacturing capability in Abu Dhabi
Mission modules
4 areas of decontamination.
The module set is configured per requirement; not every deployment needs every module. Photography is illustrative of the operating picture, Shield™ is a concept under development.
M01
Personnel decontamination
Decontamination and support provisions for personnel operating in, or withdrawing from, a contaminated environment.
A staged dirty-to-clean flow, so the line cannot be walked backwards
Containment of run-off and used media rather than release to ground
Provision for handling and bagging protective equipment
Throughput set by doctrineWet or dry line
M02
Equipment decontamination
Decontamination of carried equipment, tools and mission-critical items, including assemblies that cannot take a high-pressure wash.
Gentler processes for electronics, optics and sealed assemblies
Media selected against the contaminant, not against the fixture
Handling that keeps treated and untreated items apart
Enclosed processMedia recovery
M03
Vehicle decontamination
Vehicle decontamination provisions, sized to the carrier platform and to the operating environment it has to work in.
External surfaces, running gear and the places soil collects
Sized to the largest vehicle the response has to clear
Water and media consumption planned rather than assumed
Sized to the platformField-deployable
M04
Infrastructure decontamination
Decontamination of fixed and temporary infrastructure at the point of need: buildings, shelters, hardstanding and equipment that stays where it is.
Lance and surface application at working reach
Works around structures that cannot be moved or dismantled
Effluent capture where the site or the substance demands it
At the point of needReach tooling
Method
How a configuration is defined
The same sequence Krumm Tec runs on an industrial cleaning requirement, applied to an operational one.
01
Define the threat
The contaminant, how persistent it is, and the doctrine that governs the response. Everything downstream follows from this, not from a product list.
02
Select the module set
Not every deployment needs every module. The set is chosen against the mission, and the modules that are not needed are not carried.
03
Integrate to a platform
Because the modules are independent of the base vehicle, the configuration can follow the doctrine rather than the fleet. Integration is subject to payload and interface requirements.
04
Sustain it in service
Spare parts, consumables, operator training and inspection held in-country, under the same phased UAE localization programme as the industrial range.
Qualified parties
Request the technical dossier.
Detailed configuration, performance and compliance information is shared with qualified parties on request, under appropriate confidentiality arrangements.