CBRN decontamination

Defence & emergency readiness

Krumm Tec Shield™

A modular CBRN mission system designed around the operational requirement rather than around a vehicle: configured by threat scenario, response doctrine and operating environment.

Concept under development Modular Vehicle independent

The concept

Modular by architecture. Independent by design.

Shield™ applies the same engineering logic Krumm Tec uses for industrial cleaning to a defence and emergency-response requirement: define the contamination and the operational reality first, then build the system that answers it.

Because the mission modules are independent of the base vehicle, the configuration can follow the doctrine rather than the fleet. Integration onto a suitable platform is subject to payload and interface requirements.

Design principles
  • Modular architecture: configured to threat scenario, response doctrine and operating environment
  • Vehicle independent: integration on suitable platforms, subject to payload and interface requirements
  • UAE localization: designed for phased engineering, integration, service and manufacturing capability in Abu Dhabi
A field decontamination line in use, personnel processed from the contaminated side through to clean.
Sealed transport of contaminated equipment into the decontamination chain.
Applied decontamination of a vehicle exterior under full protective equipment.
A response team working a cordoned site with backpack application equipment.

Mission modules

4 areas of decontamination.

The module set is configured per requirement; not every deployment needs every module. Photography is illustrative of the operating picture, Shield™ is a concept under development.

M01

Personnel decontamination

Decontamination and support provisions for personnel operating in, or withdrawing from, a contaminated environment.

  • A staged dirty-to-clean flow, so the line cannot be walked backwards
  • Containment of run-off and used media rather than release to ground
  • Provision for handling and bagging protective equipment
Throughput set by doctrine Wet or dry line

Method

How a configuration is defined

The same sequence Krumm Tec runs on an industrial cleaning requirement, applied to an operational one.

01

Define the threat

The contaminant, how persistent it is, and the doctrine that governs the response. Everything downstream follows from this, not from a product list.

02

Select the module set

Not every deployment needs every module. The set is chosen against the mission, and the modules that are not needed are not carried.

03

Integrate to a platform

Because the modules are independent of the base vehicle, the configuration can follow the doctrine rather than the fleet. Integration is subject to payload and interface requirements.

04

Sustain it in service

Spare parts, consumables, operator training and inspection held in-country, under the same phased UAE localization programme as the industrial range.

Qualified parties

Request the technical dossier.

Detailed configuration, performance and compliance information is shared with qualified parties on request, under appropriate confidentiality arrangements.

What the dossier covers
  • Configuration options for each mission module
  • Performance, consumption and effluent handling
  • Compliance and certification position
  • Platform integration and interface requirements
  • Training, spares and in-service support scope